Saturday, October 29, 2011
nokia 1680 solution
1680 Camera solution
1680 short solution
1680 repair solution
1680 charger solution
1680 local mode 1
1680 local mode 2
nexian Solution
1265 lcd blank
nexian hang keypad
nexian dead
ruim connector break
ruim connector break(jumper)
Sunday, October 2, 2011
HWK error update log
Error messages:
1. HWK SD REPAIR ERROR: xxxxx
HWK upgrade error. This error occures when HWK was affected by third-party tools before upgrade or your HWK is a clone. Please don't contact anyone, it's your own stupid fault.
2. Your account is suspended. Please contact your reseller!
Your account is blocked by administrator. Please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
3. No more upgrade logs.
HWK module with this serial number was already upgraded. If you already upgraded your HWK, you need not to upgrade it again until directed. If you haven't tried to upgrade it yet, get this error on upgrade and cannot run latest software versions, please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
4. Server is going to shutdown. Please try update in 20 minutes.
Server is being stopped by administrator. Please try upgrade process again in 20 mins.
5. Account for this HWK module does not exist on server. Please contact your reseller!
Account for HWK number with this serial does not exist on server. Please contact your reseller.
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
6. Authorization failed! Are you using the latest HWK Upgrade client software version?
Server authorization error. Please ensure you are using the latest UFS suite and upgrade client software versions
7. Your account was closed by the server administrator. Please contact your reseller!
Your account on server was closed by administrator. Please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
8. Error: Your update client version is expired! Please download new client from the support area and start the upgrade again.
Download new upgrade client from support area and try upgrading your HWK module with it.
9. Error upgrading applets: HWK UPDATE ERROR: xxxxxx
Hardware problem occured during upgrade process. Please contact your reseller.
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
10. Error connecting to ufs: hwk login error: xxxx
Error establishing data transmission channel with HWK module. Please ensure your module is present and is correctly installed. If you are unable to solve the problem by yourself - please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
11. Authentication stage error: Server reported error:Not translated!
Please select English language om the software's welcome page and retry upgrade process. Now error message will be shown correctly
12. Connection to server failed: Socket Error # 10060
Connection to server failed: Socket Error # 10061
Connection refused.
Please disable or uninstall all installed antivirus and firewall software and retry upgrade operation. If the error persists, please ensure, that your internet provider is not using firewall also
13. Authentication stage error: Socket Error # 10053
Software caused connection abort.
General TCP/IP failture occured. Please disconnect from internet (having your modem switched off for example), wait for 5-7 minutes and connect to internet again and retry upgrade process.
14. Authentication stage error: Socket Error # 10054
Connection reset by peer.
TCP/IP connection to server from your PC is unstable. Please try to connect to internet via different internet provider. If you have no such possibility, please try to perform upgrade process several times until you get positive result.
15. Connection Closed Gracefully.
Connection to server was suddenly terminated. Please retry upgrade process a bit later or try to connect to the internet via another internet provider and retry the upgrade.
16. Authentication stage error: Error: Server returned unrecognized reply.
You are using an old version of the update client, please install the latest HWK Suite and use the update client from that version.
17. License 5 not active.
Please contact your UFSx reseller and request a set of license keys for your UFSx device.
By: GSM Forum
1. HWK SD REPAIR ERROR: xxxxx
HWK upgrade error. This error occures when HWK was affected by third-party tools before upgrade or your HWK is a clone. Please don't contact anyone, it's your own stupid fault.
2. Your account is suspended. Please contact your reseller!
Your account is blocked by administrator. Please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
3. No more upgrade logs.
HWK module with this serial number was already upgraded. If you already upgraded your HWK, you need not to upgrade it again until directed. If you haven't tried to upgrade it yet, get this error on upgrade and cannot run latest software versions, please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
4. Server is going to shutdown. Please try update in 20 minutes.
Server is being stopped by administrator. Please try upgrade process again in 20 mins.
5. Account for this HWK module does not exist on server. Please contact your reseller!
Account for HWK number with this serial does not exist on server. Please contact your reseller.
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
6. Authorization failed! Are you using the latest HWK Upgrade client software version?
Server authorization error. Please ensure you are using the latest UFS suite and upgrade client software versions
7. Your account was closed by the server administrator. Please contact your reseller!
Your account on server was closed by administrator. Please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
8. Error: Your update client version is expired! Please download new client from the support area and start the upgrade again.
Download new upgrade client from support area and try upgrading your HWK module with it.
9. Error upgrading applets: HWK UPDATE ERROR: xxxxxx
Hardware problem occured during upgrade process. Please contact your reseller.
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
10. Error connecting to ufs: hwk login error: xxxx
Error establishing data transmission channel with HWK module. Please ensure your module is present and is correctly installed. If you are unable to solve the problem by yourself - please contact your reseller
You need to provide your reseller at least the following information:
- The date and invoice number of your HWK purchase
- Full log given to you by upgrade client
11. Authentication stage error: Server reported error:Not translated!
Please select English language om the software's welcome page and retry upgrade process. Now error message will be shown correctly
12. Connection to server failed: Socket Error # 10060
Connection to server failed: Socket Error # 10061
Connection refused.
Please disable or uninstall all installed antivirus and firewall software and retry upgrade operation. If the error persists, please ensure, that your internet provider is not using firewall also
13. Authentication stage error: Socket Error # 10053
Software caused connection abort.
General TCP/IP failture occured. Please disconnect from internet (having your modem switched off for example), wait for 5-7 minutes and connect to internet again and retry upgrade process.
14. Authentication stage error: Socket Error # 10054
Connection reset by peer.
TCP/IP connection to server from your PC is unstable. Please try to connect to internet via different internet provider. If you have no such possibility, please try to perform upgrade process several times until you get positive result.
15. Connection Closed Gracefully.
Connection to server was suddenly terminated. Please retry upgrade process a bit later or try to connect to the internet via another internet provider and retry the upgrade.
16. Authentication stage error: Error: Server returned unrecognized reply.
You are using an old version of the update client, please install the latest HWK Suite and use the update client from that version.
17. License 5 not active.
Please contact your UFSx reseller and request a set of license keys for your UFSx device.
By: GSM Forum
Saturday, October 1, 2011
Watch Dog Definition
Watchdog stored in UEM, first used for controlling the system power-on and power-down. Both are used to block IMEI security and storage, the Watchdog will control the IMEI in UEM ROM with the IMEI stored in the IC flash, if there is a difference between the IMEI in UEM IMEI and IMEI in Flash then the Watchdog will provide the Shutdown command in 13detik time. Example watchdog could occur if the UPP who recognize the IMEI of sync as below:UEM IMEI: 35153200064744IC Flash IMEI: 35153200147706
* FLASH memory for the IMEI in UEM UEM Inside there is a place used for storing data and Tuning Values IMEI. IMEI data storage properties in UEM is OTP (One Time Programming) where the IMEI data can be written only once and can not be removed or replaced, therefore UEM used or has ever entered the IMEI number can not be used to other phones, except where IC IMEI in Flash can be equated back to the UEM IMEI itself. The process of returning the IMEI mensikronkan called Calculate RPL. Of course there is the IMEI flash IC that can be written back.If IMEI in UEM UEM problematic or corrupt then it can not be used or can not be repaired anymore! UEM IMEI is corrupt can easily be identified if we do the info on the flasher box and stated: UEM IMEI: 351p32e% 064 724 <<IMEI in UEM is no longer display the numerical data! There is no any solution other than replacing it with anew. In the above case nokia phone will usually display the IMEI ????????? when we type the following code: * # 06 # <where the IMEI that is on UEM IMEI is different than it should, although there is only one number was different. This causes the phone can not accept sim cards (GSM) and will die automatically in a few seconds.WD BB5 reply in terms more familiar with Superdongle key. so if there BB5 SD yg watchdog corrupt so well, auto restart every few minutes. gampangannya wd be interpreted as a time bomb .. dct4/wd2 if only the range of 40 seconds dah barking his alias ****** explode om, hehe .. (I wrote this term) BB5 rather lengthy reply in the range 3-5 minutes, but in principle the same aja ..wd cause is a corrupt RPL.
for the case of the WD what hars done depends on where the source of the damage, if imei diuem yah yg dah walopun calculate RPL remains an injectable solution UEM wd wrote his will in the new locker injected both UEM and flash ic (and data1 data2)kecuai if the source of the flash ic aja corrupt, and injecting enough ask2rpl/calculate data1 (ic flash) dah wrong.
specific areas that store BB5 RPL not only in Rap, but also in nandflash. who can make beautiful BB5 RPL 123 456 ... the cause of data on nandflash tereset / kehapus. solution to this problem just re-write rpl well if there is data backupx, kalo beli deh yah ndak rplx. of the process via a read ask first (when readask who read the master data that are on Rap)
* FLASH memory for the IMEI in UEM UEM Inside there is a place used for storing data and Tuning Values IMEI. IMEI data storage properties in UEM is OTP (One Time Programming) where the IMEI data can be written only once and can not be removed or replaced, therefore UEM used or has ever entered the IMEI number can not be used to other phones, except where IC IMEI in Flash can be equated back to the UEM IMEI itself. The process of returning the IMEI mensikronkan called Calculate RPL. Of course there is the IMEI flash IC that can be written back.If IMEI in UEM UEM problematic or corrupt then it can not be used or can not be repaired anymore! UEM IMEI is corrupt can easily be identified if we do the info on the flasher box and stated: UEM IMEI: 351p32e% 064 724 <<IMEI in UEM is no longer display the numerical data! There is no any solution other than replacing it with anew. In the above case nokia phone will usually display the IMEI ????????? when we type the following code: * # 06 # <where the IMEI that is on UEM IMEI is different than it should, although there is only one number was different. This causes the phone can not accept sim cards (GSM) and will die automatically in a few seconds.WD BB5 reply in terms more familiar with Superdongle key. so if there BB5 SD yg watchdog corrupt so well, auto restart every few minutes. gampangannya wd be interpreted as a time bomb .. dct4/wd2 if only the range of 40 seconds dah barking his alias ****** explode om, hehe .. (I wrote this term) BB5 rather lengthy reply in the range 3-5 minutes, but in principle the same aja ..wd cause is a corrupt RPL.
for the case of the WD what hars done depends on where the source of the damage, if imei diuem yah yg dah walopun calculate RPL remains an injectable solution UEM wd wrote his will in the new locker injected both UEM and flash ic (and data1 data2)kecuai if the source of the flash ic aja corrupt, and injecting enough ask2rpl/calculate data1 (ic flash) dah wrong.
specific areas that store BB5 RPL not only in Rap, but also in nandflash. who can make beautiful BB5 RPL 123 456 ... the cause of data on nandflash tereset / kehapus. solution to this problem just re-write rpl well if there is data backupx, kalo beli deh yah ndak rplx. of the process via a read ask first (when readask who read the master data that are on Rap)
Nokia mobile phones imei
Every GSM mobile phone Nokia has a unique series of special codes. This code is known as the IMEI (International Mobile Equipment Identity). The general format of the IMEI is normally composed of 15-digit numeric code. However, in some cases, there is a phone that has the IMEI code is more than 15 digits. Usually that is the 15 digit IMEI number is the first, the rest are usually in the form of additional code is added by the respective mobile phone manufacturer for specific purposes.
Each phone has a distinctive and unique IMEI code, in a sense, no two phones that have the same IMEI code. IMEI code of a phone can be viewed by typing the key combination "* # 06 #" (without the quotes). This key combination can be said to be very unique and universal, because it works for all phones. In addition to seeing the IMEI number by using a combination of keys, usually the IMEI number is also printed on the back of the phone near the battery. IMEI number is displayed by a combination of buttons with numbers printed on the phone should be the same. For example, you can see in the picture.
Should be the same: The IMEI number on the back panel of your phone's IMEI number should be equal to that raised by the combination of the "* # 06 #".
In general, the IMEI number on a cell phone divided into four main sections. Even so, there are several phones to write IMEI into a single unit. To help you recognize the IMEI, you divide it into several segments interchangeable follows:
AB-CDEF / GH / IJKLMN / O
Value of AB on Nokia phones could be worth 35, 44 or 49. Furthermore, the CDEF is the production code (see table production code). ABCDEF section is also known as the TAC (Type Approval Code). The next two numbers (GH) is the country code of origin of these Nokia phones (see table maker states). This section is also often referred to as FAC (Final Assembly Code) where the quality of HP's clincher.
Part IJKLMN a serial number from your cell phone. Lastly, ie 0 is a backup / spare.
By identifying the IMEI of your Nokia phone, then you will easily identify a cell phone. The mobile phone manufacturers themselves have started to "hide" code from production. Several years ago, we still can find a phone with the words "Made in Sweden" or "Made in Finland". But now, we can only see the words "Made by Ericsson" or "Made by Nokia". With the IMEI code, you can easily identify the origin of your Nokia mobile phone, cell phones whether it is BM (Black Market) or the original.
Opening the secret: With a combination of keys "* # 06 #", the IMEI can be displayed.
PRODUCTION CODE CDEF TYPE 8890 3210 9206 3210 9340 3210 0520 5110 0523 6110 3002 6150 9214 6210 9337 6210 8904 7110 8895 7110 0601 8210 8902 8210 9306 8210 0525 8810 8901 8850 0003 8890 ....... ff
STATE BUILDERS GH STATE France 00 07 Germany 08 Germany 20 Germany 10 Finland 70 Finland 19 UK 30 Korea 67 USA 40 China 60 China 80 China 02 asia
info afloat NOKIA phones made in France who is a phone with best quality the above code might be different with your phone, because each production version of the hardware will be different, if you have a phone that does not correspond with the codes mentioned above need to be asked originallit
Each phone has a distinctive and unique IMEI code, in a sense, no two phones that have the same IMEI code. IMEI code of a phone can be viewed by typing the key combination "* # 06 #" (without the quotes). This key combination can be said to be very unique and universal, because it works for all phones. In addition to seeing the IMEI number by using a combination of keys, usually the IMEI number is also printed on the back of the phone near the battery. IMEI number is displayed by a combination of buttons with numbers printed on the phone should be the same. For example, you can see in the picture.
Should be the same: The IMEI number on the back panel of your phone's IMEI number should be equal to that raised by the combination of the "* # 06 #".
In general, the IMEI number on a cell phone divided into four main sections. Even so, there are several phones to write IMEI into a single unit. To help you recognize the IMEI, you divide it into several segments interchangeable follows:
AB-CDEF / GH / IJKLMN / O
Value of AB on Nokia phones could be worth 35, 44 or 49. Furthermore, the CDEF is the production code (see table production code). ABCDEF section is also known as the TAC (Type Approval Code). The next two numbers (GH) is the country code of origin of these Nokia phones (see table maker states). This section is also often referred to as FAC (Final Assembly Code) where the quality of HP's clincher.
Part IJKLMN a serial number from your cell phone. Lastly, ie 0 is a backup / spare.
By identifying the IMEI of your Nokia phone, then you will easily identify a cell phone. The mobile phone manufacturers themselves have started to "hide" code from production. Several years ago, we still can find a phone with the words "Made in Sweden" or "Made in Finland". But now, we can only see the words "Made by Ericsson" or "Made by Nokia". With the IMEI code, you can easily identify the origin of your Nokia mobile phone, cell phones whether it is BM (Black Market) or the original.
PRODUCTION CODE CDEF TYPE 8890 3210 9206 3210 9340 3210 0520 5110 0523 6110 3002 6150 9214 6210 9337 6210 8904 7110 8895 7110 0601 8210 8902 8210 9306 8210 0525 8810 8901 8850 0003 8890 ....... ff
STATE BUILDERS GH STATE France 00 07 Germany 08 Germany 20 Germany 10 Finland 70 Finland 19 UK 30 Korea 67 USA 40 China 60 China 80 China 02 asia
info afloat NOKIA phones made in France who is a phone with best quality the above code might be different with your phone, because each production version of the hardware will be different, if you have a phone that does not correspond with the codes mentioned above need to be asked originallit
Tuesday, September 27, 2011
Blackberry simple tips
For those of you who just know these smart phones, it's worth trying a few simple tips and following this tips.
1. Restart Without Removing the Battery
After installing an application or want to run the new service, there are usually some adjustments. Well, the most frequently used to solve it is by restarting your BB, then remove the battery.
The purpose of this is actually a way to refresh the memory of the initial weight. However, less effective and was impressed complicated. Actually there was an easier way, ie: press ALT + RIGHT SHIFT + DELETE. This way you can also refresh the memory and reset the BB without wasting time.
2. Clean Memory at Event Log
Event logs on the BlackBerry shows what the system is running. When experiencing an error, to see a list of event log, the central issues can be found. Hence, in this way can also be used as a solution when BB error.
The way to access the event log, you first have to be on the home screen. Press ALT followed by typing 'LGLG', the event log will soon appear.
You can free up memory being full is to speed up your BB. You do this by pressing the HOME and select 'Clear Log'.
3. Switching Applications
One way to move quickly and efficiently in applications is to use ALT + ESC keyboard BB. The function of this feature is true just like the ALT + TAB on the computer.
When running an application, press and hold down the ALT key and immediately followed by ESCAPE button (left arrow logo right of the trackball). By simply shaking the trackball to the right and left, you can also choose the desired application. Meanwhile, to get into the application is enough just to remove them.
1. Restart Without Removing the Battery
After installing an application or want to run the new service, there are usually some adjustments. Well, the most frequently used to solve it is by restarting your BB, then remove the battery.
The purpose of this is actually a way to refresh the memory of the initial weight. However, less effective and was impressed complicated. Actually there was an easier way, ie: press ALT + RIGHT SHIFT + DELETE. This way you can also refresh the memory and reset the BB without wasting time.
2. Clean Memory at Event Log
Event logs on the BlackBerry shows what the system is running. When experiencing an error, to see a list of event log, the central issues can be found. Hence, in this way can also be used as a solution when BB error.
The way to access the event log, you first have to be on the home screen. Press ALT followed by typing 'LGLG', the event log will soon appear.
You can free up memory being full is to speed up your BB. You do this by pressing the HOME and select 'Clear Log'.
3. Switching Applications
One way to move quickly and efficiently in applications is to use ALT + ESC keyboard BB. The function of this feature is true just like the ALT + TAB on the computer.
When running an application, press and hold down the ALT key and immediately followed by ESCAPE button (left arrow logo right of the trackball). By simply shaking the trackball to the right and left, you can also choose the desired application. Meanwhile, to get into the application is enough just to remove them.
Monday, September 26, 2011
Philips Phone Secret Code
* # 7728 * #: (RSAV)
* # 7733 * #: Viewing Clutser in use
* # 7762 * #: Set SMS Bearer GPRS / GSM.
* # 7763 * #: Viewing Product Information.
* # 7766 * #: Viewing product version, in which the date for the pembuatan_nya
* # 7726 * #: Enabling Option for additional accessoris Vibrator.
* # 7337 * #: Master Reset, (sim card must be off first, so that the data on the card is not also be deleted).
* # 7343 * # Displays Clustser Code.
* # 7352 * # Displays the contents of Register software.
* # 3352 * #: Reset.
* # 337 * #: Turn on / off EFR
* # 3377 * # Displays EEPROMP conditions, from the Battery, radio, etc..
* # 7224 * #: Activate GPRS Class C.
* # 7222 * #: Enables GSM CSD Class C.
* # 7233 * # Displays the code address.
* # 7252 * #: Mengaktifkn GPRS Class B.
* # 7271 * #: Enabling GPRS Class 1.
* # 7274 * #: Activate GPRS Class 4.
* # 7276 * #: Turning GPRS Attach.
* # 7287 * #: Changing the status of GPRS Attach be attached.
* # 7288 * #: Changing the status of GPRS Attach to Try Attached.
* # 7524 * # Displays KCGPRS.
* # 7562 * # Displays the SIM Phase.
* # 7629 * # Displays POOL MAX.
* # 7632 * # Displays Code bugging of Sleep Mode.
* # 06 # Displays your IMEI (International Mobile Equipment Identity).
* # 3353 * # Reset phone.
* # 7337 * # Reset phone (Master reset), the SIM card was revoked ..
* # 337 * # Activate / deactivate EFR.
* # 7693 # Activate / deactivate the Sleep Mode. Activate it to save battery consumption when mobile phones are not being used.
* # 8463 * # Displays some information Sleep Mode: Wake, Sleep Req., Sleep.
* # 2286 * # Activate the battery data.
* # 7948 * # Turn off the phone.
* # 7728 * # Displays RSAV.
* # 7524 * # Displays KCGPRS.
* # 7562 * # Displays the SIM Phase.
* # 7629 * # Displays the MAX POOL.
* # 7632 * # Displays the Code bugging from sleep mode.
* # 7733 * # Displays the active cluster.
* # 7343 * # Displays the Cluster code.
* # 7352 * # Displays the registration software.
* # 7763 * # Displays the product information.
* # 7766 * # Displays the product version.
* # 7326 * # Displays the choice of accessories for the vibrator.
* # 7276 * # Activate the GPRS Attach.
* # 7287 * # Activate the GPRS-attached.
* # 7288 * # Activate GPRS Attached Try.
* # 7271 * # Activate GPRS Class 1
* # 7274 * # Activate GPRS Class 4.
* # 7252 * # Activate GPRS Class B.
* # 7224 * # Activate the GPRS Class C
* # 7222 * # Activate CSD GSM Class C.
* # 7762 * # To setup SMS GPRS bearer.
* # 8377 * # Displays the software version.
* # 3377 * # Displays EEPROMP conditions.*#2254# Status Register.
*#2255# Active/Deactive “Debug Call”, when activated, make a call to a busy line an the phone will display some hex-codes on the display.
*#2558# The time in days, hours, and minutes you are connected to the net..
*#7489*# atau *#1234*# Security Code.
*#7378*# Name, Length, SIM Phase.
*#3333*# Blocking list.
* # 7733 * #: Viewing Clutser in use
* # 7762 * #: Set SMS Bearer GPRS / GSM.
* # 7763 * #: Viewing Product Information.
* # 7766 * #: Viewing product version, in which the date for the pembuatan_nya
* # 7726 * #: Enabling Option for additional accessoris Vibrator.
* # 7337 * #: Master Reset, (sim card must be off first, so that the data on the card is not also be deleted).
* # 7343 * # Displays Clustser Code.
* # 7352 * # Displays the contents of Register software.
* # 3352 * #: Reset.
* # 337 * #: Turn on / off EFR
* # 3377 * # Displays EEPROMP conditions, from the Battery, radio, etc..
* # 7224 * #: Activate GPRS Class C.
* # 7222 * #: Enables GSM CSD Class C.
* # 7233 * # Displays the code address.
* # 7252 * #: Mengaktifkn GPRS Class B.
* # 7271 * #: Enabling GPRS Class 1.
* # 7274 * #: Activate GPRS Class 4.
* # 7276 * #: Turning GPRS Attach.
* # 7287 * #: Changing the status of GPRS Attach be attached.
* # 7288 * #: Changing the status of GPRS Attach to Try Attached.
* # 7524 * # Displays KCGPRS.
* # 7562 * # Displays the SIM Phase.
* # 7629 * # Displays POOL MAX.
* # 7632 * # Displays Code bugging of Sleep Mode.
* # 06 # Displays your IMEI (International Mobile Equipment Identity).
* # 3353 * # Reset phone.
* # 7337 * # Reset phone (Master reset), the SIM card was revoked ..
* # 337 * # Activate / deactivate EFR.
* # 7693 # Activate / deactivate the Sleep Mode. Activate it to save battery consumption when mobile phones are not being used.
* # 8463 * # Displays some information Sleep Mode: Wake, Sleep Req., Sleep.
* # 2286 * # Activate the battery data.
* # 7948 * # Turn off the phone.
* # 7728 * # Displays RSAV.
* # 7524 * # Displays KCGPRS.
* # 7562 * # Displays the SIM Phase.
* # 7629 * # Displays the MAX POOL.
* # 7632 * # Displays the Code bugging from sleep mode.
* # 7733 * # Displays the active cluster.
* # 7343 * # Displays the Cluster code.
* # 7352 * # Displays the registration software.
* # 7763 * # Displays the product information.
* # 7766 * # Displays the product version.
* # 7326 * # Displays the choice of accessories for the vibrator.
* # 7276 * # Activate the GPRS Attach.
* # 7287 * # Activate the GPRS-attached.
* # 7288 * # Activate GPRS Attached Try.
* # 7271 * # Activate GPRS Class 1
* # 7274 * # Activate GPRS Class 4.
* # 7252 * # Activate GPRS Class B.
* # 7224 * # Activate the GPRS Class C
* # 7222 * # Activate CSD GSM Class C.
* # 7762 * # To setup SMS GPRS bearer.
* # 8377 * # Displays the software version.
* # 3377 * # Displays EEPROMP conditions.*#2254# Status Register.
*#2255# Active/Deactive “Debug Call”, when activated, make a call to a busy line an the phone will display some hex-codes on the display.
*#2558# The time in days, hours, and minutes you are connected to the net..
*#7489*# atau *#1234*# Security Code.
*#7378*# Name, Length, SIM Phase.
*#3333*# Blocking list.
Motorola Phone Secret Code
1. * # 06 # Displays your IMEI (International Mobile Equipment Identity).
2. * # 303 # OK Change to english.
3. * # 300 # OK Displays the software version (SW and HW Version).
4. * # 301 # OK Test keypad.
5. 1234 OK phone default codes.
6. * # 311 # OK Changing the default phone code.
7. *** 113 * 1 * OK Net Monitor ON.
8. ** 113 * 1 * OK Net Monitor OFF.
9. * # 304 # OK Set Off mode engineering.
10. * # 1998072 * 304 # OK Set On engineering mode.
11. * # 307 * OK Engineering test mode.
12. * # 400 # OK ADC val call.
13. 19980722 OK Master Unlock code for phone and sim lock.
14. * # 0000 # OK Setting and restore.
15. * # 402 # OK Contrast
16. * # 305 # OK Location 1
2. * # 303 # OK Change to english.
3. * # 300 # OK Displays the software version (SW and HW Version).
4. * # 301 # OK Test keypad.
5. 1234 OK phone default codes.
6. * # 311 # OK Changing the default phone code.
7. *** 113 * 1 * OK Net Monitor ON.
8. ** 113 * 1 * OK Net Monitor OFF.
9. * # 304 # OK Set Off mode engineering.
10. * # 1998072 * 304 # OK Set On engineering mode.
11. * # 307 * OK Engineering test mode.
12. * # 400 # OK ADC val call.
13. 19980722 OK Master Unlock code for phone and sim lock.
14. * # 0000 # OK Setting and restore.
15. * # 402 # OK Contrast
16. * # 305 # OK Location 1
Chinese phone Secret Code
*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED
More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#
CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
for n95 that trips off on making call use
*#3646633#
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED
More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#
CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send
for n95 that trips off on making call use
*#3646633#
LG Phone Secret Code
ALL LG service codes.
ALL LG 2G: 2945 # * #
LG U8110 277634 # * #
LG U8120 277634 # * #
V105 LG U8120 47328545454 #
LG U8130 47328545454 #
LG U8138 47328545454 #
LG U8180 49857465454 # v10A
V11A 492 662 464 663 # LG U8180
LG U8330 637664 # * #
LG U8360 * 6 * 41 * 12 # #
LG U8360 V.10D & V.10E * 5 * 33 * 62 # #
LG U8380 525252 # * #
LG U8550 885 508 428 679 # * #
LG 8550 (italian Unlock Flash) v08j 2945 # * #
LG U880 U890 142358 # * #
LG U900 v09e 277 634 # * #
LG U900 v10b 082 065 # * #
LG U310 566366 # * #
LG U310 menu NCK815118 # * #
LG L600V 63342425 # * #
Recount cheksum (LG B1200): * 6861 #
Simlock menu (LG 7020, 7010): 2945 # * 70001 #
Simlock menu (LG 500, 600): 2947 # *
Special codes for the LG-U81XX
Code to read phone version:
1. Phone without SIM
2. nter 277 634 # * # or 47328545454 #
3. Select 'SW Ver.info'
Code to reset phone:
* Phone without SIM
* Enter 277634 # * # or 47328545454 #
* Select 'Factory Reset'
Code to enter UNLOCK MENU:
* Phone wit SIM inside
* Enter 2945 # * 88110 #
* Test Menu 8330: 637664 # * #
Test Menu 8180 V10a: 49857465454 #
Test Menu 8180 V11a: 492662464663 #
Test Menu 8130-8138: 47328545454 #
Test Menu 8110-8120: 277634 # * #
1. * # 06 # Displays your IMEI (International Mobile Equipment Identity).
2. * # 07 # displays IMEI number and software version (LG 510).
3. * 8375 # Displays the software version (LG B1200).
4. # PWR668 Test manufacturers (LG B1200).
5. 1945 # 5101 # Simlock menu (LG B1200).
6. 2945 # * 5101 # Simlock menu (LG 510W, 5200)
7. 2945 # * 70001 # Simlock menu (LG 7020.7010)
ALL LG 2G: 2945 # * #
LG U8110 277634 # * #
LG U8120 277634 # * #
V105 LG U8120 47328545454 #
LG U8130 47328545454 #
LG U8138 47328545454 #
LG U8180 49857465454 # v10A
V11A 492 662 464 663 # LG U8180
LG U8330 637664 # * #
LG U8360 * 6 * 41 * 12 # #
LG U8360 V.10D & V.10E * 5 * 33 * 62 # #
LG U8380 525252 # * #
LG U8550 885 508 428 679 # * #
LG 8550 (italian Unlock Flash) v08j 2945 # * #
LG U880 U890 142358 # * #
LG U900 v09e 277 634 # * #
LG U900 v10b 082 065 # * #
LG U310 566366 # * #
LG U310 menu NCK815118 # * #
LG L600V 63342425 # * #
Recount cheksum (LG B1200): * 6861 #
Simlock menu (LG 7020, 7010): 2945 # * 70001 #
Simlock menu (LG 500, 600): 2947 # *
Special codes for the LG-U81XX
Code to read phone version:
1. Phone without SIM
2. nter 277 634 # * # or 47328545454 #
3. Select 'SW Ver.info'
Code to reset phone:
* Phone without SIM
* Enter 277634 # * # or 47328545454 #
* Select 'Factory Reset'
Code to enter UNLOCK MENU:
* Phone wit SIM inside
* Enter 2945 # * 88110 #
* Test Menu 8330: 637664 # * #
Test Menu 8180 V10a: 49857465454 #
Test Menu 8180 V11a: 492662464663 #
Test Menu 8130-8138: 47328545454 #
Test Menu 8110-8120: 277634 # * #
1. * # 06 # Displays your IMEI (International Mobile Equipment Identity).
2. * # 07 # displays IMEI number and software version (LG 510).
3. * 8375 # Displays the software version (LG B1200).
4. # PWR668 Test manufacturers (LG B1200).
5. 1945 # 5101 # Simlock menu (LG B1200).
6. 2945 # * 5101 # Simlock menu (LG 510W, 5200)
7. 2945 # * 70001 # Simlock menu (LG 7020.7010)
Sony Ericsson Secret Code
1. * # 06 # Displays your IMEI (International Mobile Equipment Identity).
2. * # 0000 # or 0000 Resets back to english.
3. Viewing >*<<*<* service menu and the software version. Press the Yes buttonrepeatedly to see all the data software and press> to view all the text contained on the phone.
4. <** <To lock the SIM Card in order not to change the SIM Card. To open it with the unlock code.
5. * <<* Lock the service provider.
6. ** 04 * 0000 * 0000 * 0000 # Accessing the phone without SIM Card.
7. 0 # the last number dialed.
2. * # 0000 # or 0000 Resets back to english.
3. Viewing >*<<*<* service menu and the software version. Press the Yes buttonrepeatedly to see all the data software and press> to view all the text contained on the phone.
4. <** <To lock the SIM Card in order not to change the SIM Card. To open it with the unlock code.
5. * <<* Lock the service provider.
6. ** 04 * 0000 * 0000 * 0000 # Accessing the phone without SIM Card.
7. 0 # the last number dialed.
Nokia Secret code
1. IMEI (International Mobile Equipment Identity)Do I press * # 0 6 #
2. Looking at the software version, manufacture date and type of compression software softwreDo I press * # 0 0 0 0 #If it does not work try dial * # 9 9 9 9 #
3. View the status of call waitingDo I press * # 4 3 #
4. Looking at the number / number of private number to call your cell phoneDo I press * # 3 0 #
5. Displays the number redirects all callsDo I press * # 2 1 #
6. Looking at the caller's number on the phone because you do not answer (call divert on)Do I press * # 6 1 #
7. Looking at the caller's number on the phone because out of range (call divert on)Do I press * # 6 2 #
8. Looking at the caller's number on the phone because busy (call divert on)Do I press * # 6 7 #
9. Changing the operator logo on nokia 3310 and 3330 typeDo I press * # 6 7 7 0 5 6 4 6 #
10. Displays the status of the sim clockDo I press * # 7 4 6 0 2 5 6 2 5 #
11. Switching to your phone profile profileDo I press the power button off without being held
12. Changing the settings to default nokia or manufacturerDo I press * # 7 7 8 0 #
13. Reset phone timers and game scores nokia phonesDo I press * # 7 3 #
14. View the status of call waitingDo I press * # 4 3 #
15. Looking at the factory or the factory code codeDo I press * # 7 7 6 0 #
16. Displays the serial number or serial number hp, date of manufacture, date of purchase, date of last service, transfer of user data. To exit the phone must be reset again.Do I press * # 92702689 #
17. Looking at your phone security codeDo I press * # 2 6 4 0 #
18. See the ip address of your bluetooth hardwareDo I press * # 2 8 2 0 #
19. Activate EFR with the best sound quality but wasteful energy batteries. To turn off using the same code.Do I press * # 3 3 7 0 #
20. Activate EFR sound quality but the lowest energy-efficient batteries. To turn off using the same code.Do I press * # 4 7 2 0 #
21. Towards the contents of phone book quickly in nokiaDo I press the serial number then # examples: 150 #
22. Switch the call to the destination number for all callsDo I press * * 2 1 * Number Goal #
23. Switch the call to the destination number to call is not answeredDo I press * * 6 1 * Number Goal #
24. Switch the call to the destination number to your phone calls when the phone is busyDo I press * * 6 7 * Number Goal #
* 3370 # To activate the Full Rate Codec (EFR) - HP Nokia you will have a maximum sound quality but talk time is reduced about 5%# 3370 # To turn off Full Rate Codec (EFR)* # 4720 # Activate Half Rate Codec - Nokia mobile phones you will have a lower quality sound but will increase talk time (Talk time) about 30%* # 4720 # Deactivate Half Rate Codec* # 0000 # Displays phone information firmware* # 9999 # Displays the phone's firmware if * # 0000 # does not work* # 06 # For checking the International Mobile Equipment Identity (IMEI Number) we# Pw +1234567890 +1 # Lock status of the provider. (Use the "*" to separate between the "p, w" and a "+")# Pw +1234567890 +2 # Network Lock Status. (Use the "*" to separate between the "p, w" and a "+")# Pw +1234567890 +3 # Country Lock Status. (Use the "*" to separate between the "p, w" and a "+")# Pw +1234567890 +4 # SIM Card Lock Status. (Use the "*" to separate between the "p, w" and a "+")* # 147 # nelpon you know who the last time (only for vodofone)* # 1471 # Last call (only nntuk vodofone)* # 21 # Knowing where all calls are diverted* # 2640 # Displays security code in use* # 30 # to show the private number (usually IM3 neh)* # 43 # to check the status of the "Call Waiting" on your mobile phone.* # 61 # to check the number that "On No Reply"* # 62 # to check the number that "Divert If Unreachable (no service)" and find out where the transfer* # 67 # to check the number that "On Busy Calls" and find out where the transfer* # 67705646 # to remove the operator logo on 3310 & 3330* # 73 # phone timers and game scores phones* # 746025625 # Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you can get the best standby time (How long have you standby)* # 7760 # code product* # 7780 # restore factory settings* # 8110 # to see a version for nokia 8110* # 92702689 # displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repair), 5.Transfer User Data. To exit this mode, you need to restart your mobile phone* # 94870345123456789 # disables the PWM-Mem** 21 * number # turn on "All Calls" diverting to the phone number entered** 61 * number # turn on "No Reply" diverting to the phone number entered** 67 * number # turn on "On Busy" diverting to the phone number enteredThis 12 345 nokia default security code (Standard)
2. Looking at the software version, manufacture date and type of compression software softwreDo I press * # 0 0 0 0 #If it does not work try dial * # 9 9 9 9 #
3. View the status of call waitingDo I press * # 4 3 #
4. Looking at the number / number of private number to call your cell phoneDo I press * # 3 0 #
5. Displays the number redirects all callsDo I press * # 2 1 #
6. Looking at the caller's number on the phone because you do not answer (call divert on)Do I press * # 6 1 #
7. Looking at the caller's number on the phone because out of range (call divert on)Do I press * # 6 2 #
8. Looking at the caller's number on the phone because busy (call divert on)Do I press * # 6 7 #
9. Changing the operator logo on nokia 3310 and 3330 typeDo I press * # 6 7 7 0 5 6 4 6 #
10. Displays the status of the sim clockDo I press * # 7 4 6 0 2 5 6 2 5 #
11. Switching to your phone profile profileDo I press the power button off without being held
12. Changing the settings to default nokia or manufacturerDo I press * # 7 7 8 0 #
13. Reset phone timers and game scores nokia phonesDo I press * # 7 3 #
14. View the status of call waitingDo I press * # 4 3 #
15. Looking at the factory or the factory code codeDo I press * # 7 7 6 0 #
16. Displays the serial number or serial number hp, date of manufacture, date of purchase, date of last service, transfer of user data. To exit the phone must be reset again.Do I press * # 92702689 #
17. Looking at your phone security codeDo I press * # 2 6 4 0 #
18. See the ip address of your bluetooth hardwareDo I press * # 2 8 2 0 #
19. Activate EFR with the best sound quality but wasteful energy batteries. To turn off using the same code.Do I press * # 3 3 7 0 #
20. Activate EFR sound quality but the lowest energy-efficient batteries. To turn off using the same code.Do I press * # 4 7 2 0 #
21. Towards the contents of phone book quickly in nokiaDo I press the serial number then # examples: 150 #
22. Switch the call to the destination number for all callsDo I press * * 2 1 * Number Goal #
23. Switch the call to the destination number to call is not answeredDo I press * * 6 1 * Number Goal #
24. Switch the call to the destination number to your phone calls when the phone is busyDo I press * * 6 7 * Number Goal #
* 3370 # To activate the Full Rate Codec (EFR) - HP Nokia you will have a maximum sound quality but talk time is reduced about 5%# 3370 # To turn off Full Rate Codec (EFR)* # 4720 # Activate Half Rate Codec - Nokia mobile phones you will have a lower quality sound but will increase talk time (Talk time) about 30%* # 4720 # Deactivate Half Rate Codec* # 0000 # Displays phone information firmware* # 9999 # Displays the phone's firmware if * # 0000 # does not work* # 06 # For checking the International Mobile Equipment Identity (IMEI Number) we# Pw +1234567890 +1 # Lock status of the provider. (Use the "*" to separate between the "p, w" and a "+")# Pw +1234567890 +2 # Network Lock Status. (Use the "*" to separate between the "p, w" and a "+")# Pw +1234567890 +3 # Country Lock Status. (Use the "*" to separate between the "p, w" and a "+")# Pw +1234567890 +4 # SIM Card Lock Status. (Use the "*" to separate between the "p, w" and a "+")* # 147 # nelpon you know who the last time (only for vodofone)* # 1471 # Last call (only nntuk vodofone)* # 21 # Knowing where all calls are diverted* # 2640 # Displays security code in use* # 30 # to show the private number (usually IM3 neh)* # 43 # to check the status of the "Call Waiting" on your mobile phone.* # 61 # to check the number that "On No Reply"* # 62 # to check the number that "Divert If Unreachable (no service)" and find out where the transfer* # 67 # to check the number that "On Busy Calls" and find out where the transfer* # 67705646 # to remove the operator logo on 3310 & 3330* # 73 # phone timers and game scores phones* # 746025625 # Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you can get the best standby time (How long have you standby)* # 7760 # code product* # 7780 # restore factory settings* # 8110 # to see a version for nokia 8110* # 92702689 # displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repair), 5.Transfer User Data. To exit this mode, you need to restart your mobile phone* # 94870345123456789 # disables the PWM-Mem** 21 * number # turn on "All Calls" diverting to the phone number entered** 61 * number # turn on "No Reply" diverting to the phone number entered** 67 * number # turn on "On Busy" diverting to the phone number enteredThis 12 345 nokia default security code (Standard)
Subscribe to:
Posts (Atom)